8 Speedway Motors Swedge Tubes, 20" & 24", New & Used

Description

This is a package of Swedge Tubes that had been purchased from Speedway Motor, and I bought the package at an old speed shop that had closed. The Swedge Tubes have a 3/4" O.D., .065 wall thickness, and the swedged ends have 1/2-20 RH & LH threads. These tubes can be used for tie rods, drag links, chassis bracing, shift linkage, or any other chassis or light suspension use. Each heim joint adds about 1 1/2" to the length, so an assembled tube will be about 3" longer than the tube itself. This package includes the following:
Four (4) new tubes, 24" long, Speedway #910-3421224.
Three (3) used tubes, 20" long.
One (1) used tube that had been 20" long, now cut in half.
Six (6) 1/2" heim Joints, 3 RH thread, 3 LH thread.
All tubes have 1/2" by 20 threads per inch, RH threads one end, and LH threads the other end. The package also includes a package of RH & LH jam nuts, but I did not open or count the contents of that package. Because the heim joints cost more than the tubes, the original cost of this package would have been over 0, so I know you'll like my price- - -easy deal..